Analysis of Common Problems

• Reasons and treatment of powder coating powder drop phenomenon after coating

  Reasons and treatment of powder coating powder drop phenomenon after coatingThe lower the dielectric constant of powder, the easier it is to charge the particles, but the easier it is to lose the charge, which is reflected in the powder adsorption force on the workpiece, and the powder will fall off

  Analysis of Common Problems October 19, 2022
• Aluminum surface treatment process discussion

  Aluminum surface treatment process discussionMetal materials are increasingly used in various products, because metal materials can better reflect the quality of products and highlight the brand value. (to form a satin-like effect), electroplating (covered with a layer of other metals), spraying (co

  Analysis of Common Problems August 12, 2021
• Surface particles in the process of powder coating of aluminum profiles

  Surface particles in the process of powder coating of aluminum profilesAt present, anodic oxidation, electrophoretic coating and powder coating are one of the three main surface treatment methods for aluminum profiles, each of which has its own advantages and occupies a considerable market share res

  Analysis of Common Problems August 11, 2021
• Powder coating of aluminum profiles spraying three elements

  Powder coating of aluminum profiles spraying three elementsPowder coating for aluminum profiles is used, the process is electrostatic spraying, the use of abrasive spray gun, under the influence of accelerating wind, so that the powder particles sprayed out of the gun body when carrying a positive c

  Analysis of Common Problems August 10, 2021
• Problems in the actual production and use of water curtain vortex spray paint room

  Problems in the actual production and use of water curtain vortex spray paint roomAlthough the water curtain scroll spray paint room in the paint mist treatment relatively improved a lot, but due to the domestic coating equipment manufacturers, the size of many different equipment manufacturers, exc

  Analysis of Common Problems August 02, 2021
• Reasons for bad curing of powder coating film

  Reasons for bad curing of powder coating filmIn powder spraying, the reason for bad curing of the coating film is twofold, one is the formulation design of powder coating is not reasonable, the coating film performance can not meet the requirements, the second is the performance of the powder coatin

  Analysis of Common Problems June 22, 2021
• Is it necessary to have my powder cure oven commissioned by a trained professional?

  Is it necessary to have my powder cure oven commissioned by a trained professional?Absolutely. As an oven manufacturer, we cannot suggest anything more critical. Even though the oven may have been factory tested, the conditions on-site may differ from the factory setting. The functionality and perfo

  Analysis of Common Problems June 03, 2021
• Which factors are related to the excessive surface particles during the powder spraying process of aluminum profile

  In the process of powder spraying of aluminum profiles, a common problem that makes powder spraying technicians feel headache is the protruding particles-particles on the surface of the powder coating coating. The particles seriously affect the decorativeness of the surface coating of the aluminum p

  Analysis of Common Problems April 14, 2021
• The Reasons Of Rust Return Between The Pretreatment Processes

  The problem of rust return between the pretreatment processes of the workpiece has become the most concerned issue for customers. After the workpiece is rusted, it directly affects the pre-treatment film quality, which in turn affects the coating effect. Therefore, how to do rust prevention between processes is one of the key tasks in pretreatment.

  Analysis of Common Problems March 15, 2019
• Pretreatment Methods

  1，Spraying typeThe spray treatment is suitable for articles with large pipes, long pieces and relatively simple structure, and generally adopts high rack structure to save floor space. 2，Submersible processingThe submersible processing is suitable for the treatment of objects of various complex shap

  Analysis of Common Problems July 26, 2019