Company News
-
- What are the environmental requirements for painting equipment?The main equipment for painting is divided into pre-treatment equipment before painting, painting equipment, coating drying and curing equipment, mechanized transportation equipment, dust-free constant temperature and humidity supply equipment and other ancillary equipment.The painting skill of painCompany News October 31, 2018
- Summary of causes caused by rough surface finishThe first step in the production of carefully patience, the products produced on the coating line are for the sake of beauty and durability, and must be carefully produced. Let's talk about the factors that make the coating surface rough.Company News October 29, 2018
- Are you still worried about the powder on the dead corner that occurs when spraying the workpiece on the spray equipment?Electrostatic spray is a commonly used spray method. The surface of the workpiece sprayed with electrostatic spray is smooth, the coating is thick, and the defects of particles are not easy to occur. Moreover, the adhesion of the surface coating film is good, and the corrosion resistance and weatherCompany News November 19, 2018
- 28 years of coating equipment manufacturers teach you the safety issues to pay attention to when sprayingNowadays, with the powder spray production line more and more widely used in China, it also brings a lot of convenience for our work. The new moon coating research and development also pays more and more attention to the safety performance of the spray equipment production line. Let us know what proCompany News November 26, 2018
- Buying electrostatic spray equipment, how to be a smart consumerSpraying equipment is a big thing in the new factory purchase. No one wants to have problems with the electrostatic spray line. Then the problem comes. How to choose such a brand of spray equipment? It is indeed a very troublesome problem. It is not a waste of money and can not improve the quality oCompany News November 28, 2018
- Effect of powder cleaning on the life of filter element in electrostatic spray equipmentWe all know that the filter element is an important part of the spray house powder recovery system. Its quality will directly affect the recovery effect of the electrostatic spray line. Therefore, whether the filter element can clean the filter cloth in time and effectively during use. The accumulatCompany News November 30, 2018
- Automatic spray coating anti-cracking and anti-shock test instrument specificationsAnti-cracking experimental instrumentThe automatic spraying coating anti-cracking experimental instrument is mainly used to test the crack resistance of the coating coating and the putty layer after drying, and observe the thickness of the crack after drying of the coating film to determine the cracCompany News February 19, 2019
- The difference between pinhole and shrinkage hole and its treatment methodPinholes and shrinkage cavities are common defects in the use of powder coatings. Their presence not only affects the appearance quality of the products, but also seriously affects the mechanical properties and protective properties of the products. Most of the corrosion of the materials to be proteCompany News February 20, 2019
- Matters needing attention during the process of electrostatic coatingSpray voltage1.1 Within a certain range, the spray voltage increases and the amount of powder adhesion increases, but when the voltage exceeds 90KV, the amount of powder adhesion decreases with the increase of voltage.1.2 When the voltage increases, the initial growth rate of the powder layer increaCompany News February 25, 2019