Industry News
- A Brief Introduction About The Electrostatic Spraying ProcessElectrostatic spraying has been widely used since the development in the 1950s. It combines the advantages of various spraying processes into a new spraying method. When a DC high voltage is applied between the grounded workpiece and the spray gun, an electrostatic field is generated.Industry News October 29, 2018
- Three Effective Methods of Metal Surface TreatmentMethod 1 of Metal Surface Treatment: Surface treatment before painting In order to remove the various objects (such as oil stains, rust, dust, old paint film, etc.) that attached to the surface of the workpiece, provide a good substrate for coating requirements, ensure the coating film has good corrosion resistance, decorative properties and some special features.Industry News October 30, 2018
- Thermosetting powder coatingThe thermosetting powder coating is applied by a high-voltage, low-current electrostatic spraying process. When spraying, an automatic coating line consisting of a manual spray gun or multiple spray guns can be used. Friction guns that work on the principle of triboelectric charging are not effectivIndustry News October 29, 2018
- Prepare the work before painting to improve the quality of workThe airless sprayer is used in painting operations, so it must be taken care of in the process of application. This not only affects the power of the purchased construction, but also affects the quality of the construction. So, how do you prepare for the construction before and after the constructioIndustry News October 27, 2018
-
-
- Principles to be followed when designing spray equipmentFor spraying equipment, planning is not only to meet the needs of users, and the initiative of such questions, but also to consider the following guidelines.Safety criteriaIt is necessary to follow the safety planning criteria for spraying equipment and spraying conveyor lines, which mainly includeIndustry News November 02, 2018
- Electrostatic spraying technology uses the principle of static electricityElectrostatic spraying technology uses the electrostatic principle to surface the workpiece, so the entire powder coating process also requires a complete powder coating equipment to implement. Depending on how the powder is sprayed and the recyclability of the powder material itself. The powder coaIndustry News November 05, 2018
- Coating equipment - pretreatment electrophoresisFirst, the voltageThe voltage has a great influence on the electrophoretic coating; the higher the voltage, the thicker the electrophoretic paint film, and the spraying ability can be improved for the parts that are difficult to spray, and the construction time is shortened. However, if the voltageIndustry News November 07, 2018
- Scope of painting pretreatmenthigh quality powder coating line,powder coating factory,high quality pretreatment, www.coating-equipment.com Hebei Hanna technology co ltdIndustry News November 09, 2018