News
- Spray gun atomization technology and its development trendWhen a coating is applied to the surface of a workpiece of various materials, the coating to obtain a good atomization depends on many factors. Coatings, spray gun selection and spray techniques are undoubtedly important. A thorough understanding of the spray tool, the air atomizing spray gun, is thIndustry News January 11, 2019
- Electrostatic Powder Spraying Process Can Improve the Utilization of Coating PowderElectrostatic Powder Spraying Process Can Improve the Utilization of Coating PowderIndustry News February 27, 2019
- What are the main equipments of a typical paint factory?The main equipments for painting include: water spray painting room; conveying system; hot air drying room 1. Water spinning spray room Water rotary spray paint room is also called hydraulic spinning type spray paint room. The chamber uses a gas laminar flow suppression method to prevent the paint mCompany News February 28, 2019
- What is the material of the powder coating booth? Why use such material?Powder coating booth in general adopting engineering plastic, it including both PVC and PP. PVC usually applied in common powder coating booth, PP used in high-end quality powder coating booth. The engineering plastic has good insulating property, which is uneasy to accumulate the powder on the bootCompany News June 27, 2019
- What is the material of the powder coating booth? Why use such material?Powder coating booth in general adopting engineering plastic, it including both PVC and PP. PVC usually applied in common powder coating booth, PP used in high-end quality powder coating booth. The engineering plastic has good insulating property, which is uneasy to accumulate the powder on the bootCompany News January 15, 2018
- Brief introduction about the powder recovery systemThere are two types of recovery system, one type is of single lever filter element recovery equipment (according to the recovery amount to choose the number of the filter element, about 2.4.6.8.10.15 etc )The filter element used by the filter recovery system is divided into common and lamination twoCompany News June 27, 2019
- Brief Introduction About Hanna Automatic Conveyor Transport SystemHanna automatic conveyor system features:1. Based on customer needs, provide the corresponding optimal design2. Fine workmanship to ensure operational stability3. Highly automated process to increase efficiencyIndustry News July 30, 2019
- The electrostatic powder spraying recovery deviceThe electrostatic powder spraying recovery device is derived from the dedusting device in the environmental protection equipment.Its basic function is to achieve two-phase separation of gas-solid mixture, and the difference is that the solid phase after dust removal is waste, while the solid phase aIndustry News March 29, 2018
- Engineering application characteristics of spraying lineThe spraying line equipment is suitable for painting and powder coating treatment on the surface of the workpiece. It is used for the spraying work of single piece or small batch work piece, and the transportation operation is formed with the conveyors such as hanging conveyor, electric rail trolley, ground conveyor and so on.Industry News April 03, 2018
- Advantages and disadvantages of powder coatingPowder coating is a new 100% solid powder coating without solvents. It has the characteristics of solvent free, pollution-free, recyclable, environmental protection, saving energy and resources, reducing labor intensity and coating mechanical strength. Next, we mainly introduce the advantages and diIndustry News April 08, 2018