Online spraying pretreatment for powder coating equipment

Our product advantages:

1. Adopt automatic conveying, which can increase production efficiency by 2-4 times than manual and semi-automatic production lines.

2. With automatic pretreatment, only one technicist and two general workers are needed for the whole line, which can save a lot of manpower.

3. Spraying pretreatment can effectively reduce the length of the production line body, thus reducing the use of the site.

4. The submarine pretreatment can effectively reduce the length of the production line body, thereby reducing the use of the site, and can also clean the workpiece in all directions to ensure no dead angle.

5. The top of the shed body is designed with water seal to isolate the steam more thoroughly;

6. The shed body, cylinder block and spray pipe are all made of stainless steel and full welding to ensure the normal service life of more than 15 years;

7. The contours of each process section are provided with contoured baffles and matching transition sections to prevent cross-flow;

8. The top design has a wind trough, which can discharge the acid gas and vapor accumulated at the top in time.