Article List
- Powder coating line Pretreatment section production managementThe pretreatment process is divided into manual pretreatment and automatic pretreatment, and automatic pretreatment is divided into automatic spraying and automatic immersion spraying. The workpiece must be degreased and de-rusted before powder coating. There are many chemicals used in this section,Company News December 29, 2020
- How to ensure the quality of small and medium-sized parts sprayingThere are many manufacturers of small and medium-sized components on the market, each with different technologies. But even so, the maintenance and quality requirements for powder coating equipment for small and medium-sized parts are equally stringent. How can these requirements be met? 1. For pow
- How electrostatic spraying equipment can last longerElectrostatic spraying equipment should not be exposed to rain or humidity and should be kept away from flammable gases and liquids.The user should regularly check cleaning and maintenance and clean the powder supply system once a week to ensure smooth operation. When changing powder, the control poCompany News December 24, 2020
- The difference between electrostatic painting and spray paintingTraditional liquid spraying and manual spraying methods are associated with high paint waste, serious environmental pollution, cleaning difficulties, low productivity, poor color, and unstable quality. Electrostatic spray painting is the solution to these problems. It is the same principle as electrCompany News December 23, 2020
- Powder coating system: Causes and treatment for blisteringCauses of blistering and loss of light in powder coating system spraying and how to deal with it. Causes 1. The surface of the object to be coated is wet or there is acid, salt, salt, and other substances. 2. Water mixed with paint and thinners. 3. The surface of the object to be coaCompany News December 22, 2020
- What is the difference between the electrostatic coating and spray painting?Traditional liquid spraying and manual spraying are associated with high paint waste, environmental pollution, cleaning difficulties, low production efficiency, poor color, and unstable quality. Electrostatic spray painting is the solution to these problems. It is the same principle as electrostaticCompany News December 21, 2020
- Powder coating oven PrecautionsWhen selecting a powder coating oven, the following points should be noted. 1, with automatic temperature control of the powder coating oven, the oven temperature should be adjustable within 100-250 ℃, control the temperature error is less than ± 10%. 2, with automatic timing control of the powdCompany News December 16, 2020
- Cleaning methods for powder coating linesAsh cleaning methods. 1, Gas cleaning: gas cleaning is with the help of high-pressure gas or external atmosphere blowing back the filter bag of the spray paint room to remove the accumulated ash on the filter bag. Gas cleaning includes pulse blowing cleaning, reverse blowing air cleaning, and reveCompany News December 14, 2020
- Important factors determining coating qualityAn automated powder coating system is the hardware of coating quality, but even the best and most advanced automated powder coating system is still useless if it is not properly managed. Keeping the automated powder coating system in the good technical condition is one of the necessary conditions toCompany News December 11, 2020
- Electrostatic powder coating booth Improvement ideas1. Design level The urgent need for improvement in the design level is quite obvious, mainly because many companies do not invest enough in this area, which stems from a lack of awareness. As a result, the flow of advanced electrostatic powder coating booths into the Chinese market has been muchCompany News December 10, 2020