News

• Cheap Price Automatic Powder Coating Line

  Our Powder Coating System includes: 1. Electrostatic Powder Coating Machine 2. Powder Coating Booth, Powder Spray Room, Multi-function Spray Room, Fast Automatic Color Change Powder Spraying Room, Electrostatic Powder Spraying Gun,Reciprocator, PLC Contral System 3. Pretreatment Equipment 4. Powder Recovery Equipment, Large Cyclone Powder Recovery System 5. Curing Oven, Hot Air Furnace, Biological Granule Combustion Machine, Gas Burner, Electric Heating Oven 6. Powder Coating System Transport Components, Automatic Elevating Equipment, Chain Suspension Conveying Equipment

  Industry News May 28, 2018
• Manual Spraying with Small Circulation Spray Chain and Two Door Opening Box Curing Oven

  Receive the impact of some sites

  Industry News May 30, 2018
• Fast Automatic Color Change Equipment Powder Coating Booth Working Principle

  Among the powder sprayed by the powder coating gun, a part of powders that are not adsorbed on the workpiece will follow the exhaust blower airflow into the big cyclone. In the separator, the particles of the larger powders are separated and falling on the vibrating screen.

  Industry News May 31, 2018
• Learning the detail of the spraying gun

  The basic structure of the spray gun includes gun body, nozzle set (wind cap, nozzle and gun needle, short for three piece), control parts and other accessories.

  Industry News May 28, 2018
• Configuration Selection of Electrostatic Spray Equipment or Spray Line

  There are many kinds of collocation for electrostatic powder spraying line. Next I will give you some simple analysis.

  Industry News June 05, 2018
• Aluminum Profile Powder Coating Line

  In the fast developing market of Aluminum alloy, the traditional powder coating equipment can not meet the present production environment.Intelligent aluminum alloy powder coating equipment is the need of the present.

  Industry News April 29, 2018
• Several specific data parameters need to be considered when determining the detailed plan of powder coating line.

  After that, the configuration of your electrostatic powder spraying line was confirmed. Welcome to visit Hanna powder coating Co., Ltd. www.coating-equipment.com

  Industry News June 08, 2018
• What problems should be paid attention to during the spraying process?

  In the spraying project, the surface of the spray fan should be perpendicular to the surface of the coating. When the gun is manually operated, the width of each spray gun should not be too large. Otherwise, the coating will be uneven. The direction of the spray gun should always be parallel to the

  Industry News September 29, 2019
• Advantages of Automatic Powder Coating Equipment

  Now, the development of automatic powder coating equipment is very rapid, the market application has been very wide, the advanced powder coating concept is the product of high technology, making the enterprise more convenient and more efficient.

  Industry News June 09, 2018
• Several basic issues that should be considered when choosing electrostatic powder coating machines

  Low performance lance not only wastes powder, but also wastes manpower and waste energy, and the quality of spraying is difficult to control.A lot of poor performance lance is better than an excellent spray gun. The more guns you have, the more you will have a headache.

  Industry News June 11, 2018