News

• Prepare the work before painting to improve the quality of work

  The airless sprayer is used in painting operations, so it must be taken care of in the process of application. This not only affects the power of the purchased construction, but also affects the quality of the construction. So, how do you prepare for the construction before and after the constructio

  Industry News October 27, 2018
• How to spray electrostatic powder?

  Industry News October 30, 2018
• Curing Heating Oven of Powder Coating Line

  Industry News October 31, 2018
• Principles to be followed when designing spray equipment

  For spraying equipment, planning is not only to meet the needs of users, and the initiative of such questions, but also to consider the following guidelines.Safety criteriaIt is necessary to follow the safety planning criteria for spraying equipment and spraying conveyor lines, which mainly include

  Industry News November 02, 2018
• Electrostatic spraying technology uses the principle of static electricity

  Electrostatic spraying technology uses the electrostatic principle to surface the workpiece, so the entire powder coating process also requires a complete powder coating equipment to implement. Depending on how the powder is sprayed and the recyclability of the powder material itself. The powder coa

  Industry News November 05, 2018
• Coating equipment - pretreatment electrophoresis

  First, the voltageThe voltage has a great influence on the electrophoretic coating; the higher the voltage, the thicker the electrophoretic paint film, and the spraying ability can be improved for the parts that are difficult to spray, and the construction time is shortened. However, if the voltage

  Industry News November 07, 2018
• Scope of painting pretreatment

  high quality powder coating line,powder coating factory,high quality pretreatment, www.coating-equipment.com Hebei Hanna technology co ltd

  Industry News November 09, 2018
• Tips: Precautions for the use of pneumatic spray guns

  Spray gun is an important part of spray painting equipment.Therefore, whether the operation of the spray gun is normal affects the quality of the spray paint products produced.

  Industry News November 12, 2018
• How to clean up after the spray gun is used

  sales@coating-equipment.com In our opinion, no matter what machine tools are used, they must be cleaned and maintained in time. This will not only prolong the service life of the machine, but also eliminate the manpower, material resources, financial resources, etc. in the next use. Wait. Let's share the following knowledge about how to effectively clean up the gun after it has been used.

  Industry News November 14, 2018
• Powder Coating Machine Common Malfunctions and Treating Methods

  1.Usually powder spray is normal and now the amount of powder spray is small. It is possible to block the powder pump core with impurities such as recycled powder or solidified substances in the powder pump. Unscrew the powder pump and clean it up.B. Check the four pressure gauges, which may have a large fluid pressure or open the cleaning and atomizing gas.

  Industry News November 29, 2018