News

• Powder coating windproof dust suppression net features

  Powder coating windproof dust suppression net features The wind and dust suppression net is mainly used for wind and dust suppression of coal storage plants in coal mines, coking plants, power plants and other enterprises; ports, dock coal storage plants and various stockyards; steel, building materials, cement and other enterprises Dust suppression;

  Industry News November 29, 2018
• The essentials of the spray gun operation

  First, the speed of the spray gun.When spraying, the speed of the spray gun has a great influence on the painting effect.1. If the manual spray gun moves too fast, the surface coating of the coated object is thin, which is thin and thin, and has poor leveling and roughness;2. If the manual spray gun

  Industry News November 16, 2018
• How to solve the shrinkage hole in the spray line during the spraying process?

  The surface shrinkage of the spray equipment during the coating process has both substrate reasons, pretreatment, chrome contamination, powder coating, compressed air and management. It should be targeted at different shrinkage. Holes, find the cause, take different solutions, and establish preventi

  Industry News November 23, 2018
• Reasons for Unqualified Acetone Test of Coating

  Tel/Wechat/Whatsapp: +86 13363836725

  Industry News November 27, 2018
• Hanna Furnace Temperature Diagram of Curing Oven.

  Curing oven of powder coating system:Objective: the curing oven is one of the most important equipment in the production line of powder coating equipment, and its temperature uniformity is an important index to ensure the quality of the coating.The heating way of the oven is: radiation, hot air circulation and radiation and so on.

  Industry News December 07, 2018
• You must acquire knowledge when spraying spray line powder coating

  Do you know the spray line? Do you know about powder coating? Come on, you have to get a little knowledge when using the powder sprayer under the science spray line equipment.Powder spraying is a dry spraying method. It is applied to some metal workpieces by spraying or fluidized bed. sales@powderspraymachine.com

  Industry News December 07, 2018
• How to choose the spray gun in the electrostatic spray equipment?

  In the contemporary society, the continuous advancement of science and technology and the rapid development of society have led to the development of electrostatic spray equipment. The development of electrostatic spray lines has brought great convenience to everyone, especially when the smart spray

  Industry News December 05, 2018
• Is the powder coating of the electrostatic spray equipment precautions harmful to the human body?

  Recently, I have often seen people asking me about the harm of thermosetting powder coating on the Internet. Today, Hanna Technology tells us whether thermosetting powder coatings are poisonous? First of all, it is clear that thermosetting powders are environmentally friendly materials, non-toxic, a

  Industry News December 03, 2018
• The details of the spray equipment in the powder room that you have to know

  sales@powderspraymachine.com The production of powder coating spray booth is the key process in the spraying production process. When the spray equipment is working, the key to the quality of the surface of the spray is the control of various process parameters during the spraying process.

  Industry News December 12, 2018
• Solution for local or large area falling off of workpiece during spray molding

  sales@powderspraymachine.com According to the statistics of hanna technology customer service personnel, how can the customer solve the problem of the quality of the sprayed plastic products in the spray equipment, such as the local or large area peeling off during the spray process?

  Industry News December 14, 2018