News
- In-depth analysis of the overall development trend of spray equipment in the hardware industrysales@powderspraymachine.com In recent years, with the rapid development of the domestic hardware industry and the increasing demand for hardware production in foreign countries, as the auxiliary and supporting projects for the production of the main engine - the spray molding industry has also ushered in new development opportIndustry News December 17, 2018
- Powder electrostatic spraying process technology introduction and operation processPowder coating is a new technology and new technology in the field of modern coating industry. It is also one of the new technologies promoted in China. It is widely used in home appliances and other fields. Powder coating is a highly protective and highly decorative coating method. To obtain a satiIndustry News December 19, 2018
- General technical conditions for surface coating of steel productsThis standard is mainly applicable to the surface coating of steel products. Where there is no special requirement in the contract documents, the surface coating of the products shall comply with the provisions of this standard.First, the surface treatment before paintingAll steel raw materials usedIndustry News December 21, 2018
- Frequent problems in metal phosphating treatment and countermeasuresMetal phosphating is one of the common measures for metal surface treatment. However, in the process of operation, metal phosphating is prone to defects and affects the treatment effect, so metal phosphating often has defects and solutions.1. The phosphating part returns to rust.Cause: The free acidIndustry News December 24, 2018
- Coil coating processThe coil coating process is similar to the giant presses that print every evening. The entire process is non-stop, always running at a fixed speed, and the coil metal is continuously joined so that the length of the coil is virtually infinite. However, unlike printed newspapers, metal coils need toIndustry News December 26, 2018
- Does the painting process require the design of a levelling chamber?1. Adopt manual and no-line painting method:HANNA Coating Recommendation: Before putting the product into the oven, let the sprayed product stand still for 5~10 minutes (this is called cold leveling) in a dust-free environment and then put it into the fixed oven for baking. Generally, the ordinary oIndustry News December 28, 2018
- How to choose the right electrostatic powder coating equipment?For most users, is not very familiar with the coating technology and the powder coating application, so there will be some blind spots during the purchase process. How to choose the right powder coating line, let us start from the common appearing misunderstandings to analyze how to choose the right one.Industry News December 27, 2018
- Brief Introduction About Plastic Product Spraying Process1. Annealing: Internal stress is easily formed during plastic molding, and the stress concentration is easy to crack after coating. Annealing or full-face treatment can be used to eliminate stress. The annealing treatment is to heat the ABS plastic molded part below the heat distortion temperature.Industry News December 27, 2018
- General technical conditions for surface coating of steel productsThis standard is mainly applicable to the surface coating of steel products. Where there is no special requirement in the contract documents, the surface coating of the products shall comply with the provisions of this standard.First, the surface treatment before paintingAll steel raw materials usedIndustry News January 02, 2019
- Frequent problems in metal phosphating treatment and countermeasuresAsl metal phosphating is one of the common measures for metal surface treatment, but in the process of operation, metal phosphating is prone to defects and affect the treatment effect, then metal phosphating often has defects and solutions.1. The phosphating part returns to rust.Cause: The free acidIndustry News January 04, 2019