News
- Two types powder coating boothPVC is Insulating and non-conductive material ，The electrostatic powder forms a light and thin layer on the surface of the material, which has a rebound effect on the electrostatic powder afterwards, effectively avoiding powder accumulation. easy to clean, save time and labor; the booth is containedIndustry News May 25, 2020
- What is the difference between painting and powder coating? 99% of paint people don't knowPainting and dusting are two completely different coating methods. Painting is the use of compressed air to disperse liquid paint (commonly known as paint dispersed into paint mist particles adhering to the surface of the object to be coated, while dusting is done by means of compressed air arch powIndustry News January 09, 2019
- The difference between bridge type oven and tunnel oven1.Bridge type curing oven. The bridge-type oven is set up. The bridge oven has a good thermal insulation effect because the hot air is on a high level and will not convection with the cold air outside the oven.And the operation cost is low. But more suitable for wide workpiece is not suitable for long workpiece.Industry News February 27, 2019
- Technical requirements for electrostatic powder coatingFirst, the effect of coating ambient temperature and temperature on the film thickness. The powder spray amount is 170-200 g/min; the voltage is 70 KV, and the distance between the spray gun and the object to be coated is 20 cm. When the temperature is between 20 and 30 ° C and the humidity is between 60 and 80%.Industry News February 27, 2019
- Various Pretreatment Processing for Powder Coating LinePretreatment methods& differentIndustry News February 28, 2019
- Pretreatment SystemChromizing, Phosphating,Vitrification, Silane: Chromization Principle: chromate solution and metal reaction, produce chromization layer on the surface of the workpiece.Application: mainly for aluminum, magnesium and its alloyswhen dealing with steel, often matching used with phosphating.Function: inIndustry News July 08, 2019
- Manual Color Change Steps For Filter Recovery Spray BoothThe Hanna powder coating line manual quick color change solution will reduce production stagnation time and increase productivity. Color change time: 15 minutesAdvantages: EconomicalDisadvantages: Not suitable for multiple color changeHanna patent: Filter recovery unit quick disassemble is convenient for color changeIndustry News July 30, 2019
- Full Automatic Power And Free Overhead Conveyor LineOur factory successfully developed a double line design of the full automatic powder coating production line – – Power And Free Overhead Conveyor, which effectively improves work efficiency, saves raw materials, and occupy less area than the other powder coating production line, solves the problem of the small size of the factory.Industry News July 30, 2019
- How to quickly change colors in powder coating systemSpraying equipment is more and more widely used in people’s lives. For the industry that uses electrostatic spraying equipment, the color of the product is different. It is difficult to change another color in a few days or a few hours. At the same time, it is necessary to clean the spray booth andIndustry News September 05, 2019
- Why do you need to use spray equipment to make aluminum profiles?1. Electrostatic powder coating may cause more electrical disturbances. The resistance of the spray chamber, spray gun device, electric furnace, drying tunnel and other equipment is higher. The electric shock caused by the electrostatic high voltage of the spraying device is often blocked by the shoIndustry News September 06, 2019