Powder Coating FAQ
- Several ways to identify the authenticity of powder coatingsSeveral ways to identify the authenticity of powder coatingsThere are several ways to identify the authenticity of powder coatings. I. Appearance identification method 1. Hand feeling Hand feeling is silky smooth, loose, floating. Feel rough, sinking hands, feel heavy. Grab a handfulPowder Coating FAQ October 14, 2022
- Electrostatic spraying coating principleIn 1962, the French Sames Company successfully researched powder electrostatic spraying equipment, which laid the foundation for the rapid development of powder coating technology. Powder electrostatic spraying method is the most widely used process in electrostatic coating construction. The electroPowder Coating FAQ September 28, 2022
- What standards are needed for electrostatic powder coatingWhat standards are needed for electrostatic powder coating1. The fineness of electrostatic powder particles: The significant difference between powder coatings and solvent-based coatings is that the dispersion medium is different. In solvent-based coatings, the use of organic solvents as a dispersioPowder Coating FAQ October 12, 2022
- Powder coating and its precautionsPowder coating and its construction precautionsPowder coating refers to a new type of solvent-free 100% solid powder coating. It is solvent-free, non-polluting, recyclable, environmentally friendly, saves energy and resources, reduces labor intensity and has high mechanical strength of the coating fPowder Coating FAQ October 20, 2022
- The identification method of powder coatingThe identification method of powder coatingI. Appearance identification method1. Hand feeling: hand feeling is silky smooth, peng loose, floating. Feel rough, sinking hands, feel heavy. Grab a handful of powder in the hands, the smoother the powder pescado, good quality, and vice versa powder roughPowder Coating FAQ October 25, 2022
- Problems to be noted in the powder coating boothProblems to be noted in the powder coating booth The production of powder coating booth is a key process in the production of spraying, and the key to the surface quality of the sprayed workpiece lies in the control of the process parameters. The amount of powder and atomized air are the two key tecPowder Coating FAQ October 28, 2022
- Electrostatic spraying has the following features compared with air spraying(1) The utilization rate of coating is greatly improved In general, the utilization rate of paint in air spraying is only 30% to 50%, and for porous or mesh structure workpiece, the utilization rate of paint is less than 30%. The use of electrostatic spraying, paint particles by the force of tPowder Coating FAQ September 27, 2021
- Detailed introduction of sandblasting rust removal technology knowledge General knowledge of sandblasting rust removalDetailed introduction of sandblasting rust removal technology knowledgeGeneral knowledge of sandblasting rust removal Sandblasting to remove rust is to use compressed air as the power to form a high-speed jet beam to spray material (copper ore, quartz sand, diamond sand, iron sand, Hainan sandPowder Coating FAQ August 05, 2021
- Introduction to the three major systems of spraying and paintingIntroduction to the three major systems of spraying and painting Solvent-based coatings contain solvents, which emit a large amount of VOC (Volatile Organic Compounds) during the production and construction process, endangering human health and causing environmental pollution. According to statisticPowder Coating FAQ August 03, 2021
- How to improve the leveling of powder coatings?How to improve the leveling of powder coatings? Powder coating is a new type of solvent-free 100% solid powder coating. It has two major categories: thermoplastic powder coatings and thermosetting powder coatings. The coatings are made of resin, color filler, curing agent and other additives, mixedPowder Coating FAQ July 30, 2021