Service
- The function of the surface adjustment process and its control pointsThe function of the surface adjustment process and its control pointsIndustry Technical Documents June 23, 2021
- Reasons for bad curing of powder coating filmReasons for bad curing of powder coating filmIn powder spraying, the reason for bad curing of the coating film is twofold, one is the formulation design of powder coating is not reasonable, the coating film performance can not meet the requirements, the second is the performance of the powder coatinAnalysis of Common Problems June 22, 2021
- How to remove the unqualified phosphate film?How to remove the unqualified phosphate film?Removal of phosphate film can be carried out by one of the following methods. ① sandblasting of the workpiece. ② workpiece in 10% to l5% hydrochloric acid solution in a strong corrosion at room temperature, or in the heated to 40 to 50 ℃ of sulfuricIndustry Technical Documents June 21, 2021
- Commonly used metal surface treatment methods and their characteristicsCommonly used metal surface treatment methods and their characteristics In the process of heat treatment, machining, transportation and storage, the metal surface will inevitably be oxidized, resulting in a layer of uneven thickness of oxidation. Let's summarize what are the common methods of metalIndustry Technical Documents June 18, 2021
- Why epoxy paint is not suitable for outdoor useWhy epoxy paint is not suitable for outdoor usePowder Coating FAQ June 17, 2021
- What's the Best Coating Method for Extended Outdoor Performance?What's the Best Coating Method for Extended Outdoor Performance?For long-lasting powder coating that holds up outdoors, consultant Rodger Talbert suggests pretreatment and washing options, a primer layer and a top coat.Q: We are a manufacturer of indoor furniture and we are currently planning to addIndustry Technical Documents June 04, 2021
- Is it necessary to have my powder cure oven commissioned by a trained professional?Is it necessary to have my powder cure oven commissioned by a trained professional?Absolutely. As an oven manufacturer, we cannot suggest anything more critical. Even though the oven may have been factory tested, the conditions on-site may differ from the factory setting. The functionality and perfoAnalysis of Common Problems June 03, 2021
- What are the key differences between “fluidized bed” and “electrostatic fluidized bed”?Q:What are the key differences between “fluidized bed” and “electrostatic fluidized bed”?With fluid bed coating, the part has to be preheated, immersed in the coating and then flowed out.Electrostatically assisted fluidized bed coating does not dip the part into the powder, it generates a cloud of cIndustry Technical Documents June 02, 2021
- Coating Thickness Measurement: The FundamentalsA review of available test methods, common applications and innovative instrumentation...Coating thickness measurement is a concern for both finishers and for companies receiving finished components. Defective coatings lead to rust. As a result, product liability requires quality control of coatingsIndustry Technical Documents May 19, 2021
- Choosing the right conveyor system, coating technology, and ancillary equipmentThe selection of a paint- or powder-finishing system depends on a number offactors, including the types of parts being coated, the required surface-treatment process, size and weight of the parts, sequence of process steps, and the flow of material through the entire fabrication process.The finishinPowder Coating FAQ May 18, 2021