Article List
- How to save the leftover thermosetting powder coating when sprayingThe difference between thermosetting and thermoplastic powder coatingsThermosetting refers to the heating can be cured cross-linked, cross-linked coating does not melt or dissolve, there is a chemical reaction during the heating process. Thermoplastic refers to the heating of the powder can soften,Industry Technical Documents July 06, 2021
- The difference between thermosetting and thermoplastic powder coatingsThe difference between thermosetting and thermoplastic powder coatingsThermosetting refers to the heating can be cured cross-linked, cross-linked coating does not melt or dissolve, there is a chemical reaction during the heating process. Thermoplastic refers to the heating of the powder can soften,Industry Technical Documents July 05, 2021
- Reasons for inter-process rusting due to pre-treatmentThe problem of rust return between processes in the pre-treatment of workpiece painting has become the most important concern of our customers. After rusting, it directly affects the film quality of pretreatment, and then affects the painting effect. Therefore, how to do a good job of rust preventiIndustry Technical Documents June 25, 2021
- Degreasing and phosphating in surface pretreatmentDegreasing and phosphating in surface pretreatment Degreasing. Phosphating solution excellent phosphate film as long as the oil is removed completely on the exterior of the workpiece to constitute, cleaning agents due to oil residue on the exterior of the workpiece will not only severely prevIndustry Technical Documents June 24, 2021
- The function of the surface adjustment process and its control pointsThe function of the surface adjustment process and its control pointsIndustry Technical Documents June 23, 2021
- Reasons for bad curing of powder coating filmReasons for bad curing of powder coating filmIn powder spraying, the reason for bad curing of the coating film is twofold, one is the formulation design of powder coating is not reasonable, the coating film performance can not meet the requirements, the second is the performance of the powder coatinAnalysis of Common Problems June 22, 2021
- How to remove the unqualified phosphate film?How to remove the unqualified phosphate film?Removal of phosphate film can be carried out by one of the following methods. ① sandblasting of the workpiece. ② workpiece in 10% to l5% hydrochloric acid solution in a strong corrosion at room temperature, or in the heated to 40 to 50 ℃ of sulfuricIndustry Technical Documents June 21, 2021
- Commonly used metal surface treatment methods and their characteristicsCommonly used metal surface treatment methods and their characteristics In the process of heat treatment, machining, transportation and storage, the metal surface will inevitably be oxidized, resulting in a layer of uneven thickness of oxidation. Let's summarize what are the common methods of metalIndustry Technical Documents June 18, 2021
- Why epoxy paint is not suitable for outdoor useWhy epoxy paint is not suitable for outdoor usePowder Coating FAQ June 17, 2021
- What's the Best Coating Method for Extended Outdoor Performance?What's the Best Coating Method for Extended Outdoor Performance?For long-lasting powder coating that holds up outdoors, consultant Rodger Talbert suggests pretreatment and washing options, a primer layer and a top coat.Q: We are a manufacturer of indoor furniture and we are currently planning to addIndustry Technical Documents June 04, 2021