Automatic powder coating equipment quickly change powder within 15 minutes

For industries that use automatic powder coating equipment, sometimes a workpiece needs to be powder coating with various colors. Changing color frequently is not only time and energy consuming, but also requires high requirements for powder coating machine. If the color change when powder coating by manual cleaning dusting way, workers have to timely recovery of the remaining powder in powder coating room, or a variety of colors will be mixed together, affecting the quality of powder coating, the following solutions is believed to provide some help for powder coating equipment manufacturers and the enterprises:

1. Keep powder coating room and recycling system simple, clean, flat. The more simple,neatness the recycling system is, the better it is , the filter element in the recovery system should be removed in time and clean up.

2. Recovery diversification, recovery system can be quickly removed and replaced quickly, save time.

3. Filter element diversification, each color is prepared in one set, only need to clean the powder at the bottom of powder coating room and recovery system, what color you need directly to change a clean filter element can remove the filter, then clean up.

4.If conditions permit，enterprises can use the powder coating room made by German PP board, the antistatic effect about 25%, not sticky powder, is conducive to the timely recovery of powder.

In one word, you just need a set of powder coating room and large cyclone recovery system made by Hebei Hanna metal technology Co.,Ltd, the color change speed is only 15 minutes, the recovery rate more than 98%, we have powder coating specialists and scientific research personnel, energy saving, environmental protection and high efficiency is our pursuit.