Reasons and treatment of powder coating powder drop phenomenon after coatingThe lower the dielectric constant of powder, the easier it is to charge the particles, but the easier it is to lose the charge, which is reflected in the powder adsorption force on the workpiece, and the powder will fall off
Aluminum surface treatment process discussionMetal materials are increasingly used in various products, because metal materials can better reflect the quality of products and highlight the brand value. (to form a satin-like effect), electroplating (covered with a layer of other metals), spraying (co
Surface particles in the process of powder coating of aluminum profilesAt present, anodic oxidation, electrophoretic coating and powder coating are one of the three main surface treatment methods for aluminum profiles, each of which has its own advantages and occupies a considerable market share res
Powder coating of aluminum profiles spraying three elementsPowder coating for aluminum profiles is used, the process is electrostatic spraying, the use of abrasive spray gun, under the influence of accelerating wind, so that the powder particles sprayed out of the gun body when carrying a positive c
Problems in the actual production and use of water curtain vortex spray paint roomAlthough the water curtain scroll spray paint room in the paint mist treatment relatively improved a lot, but due to the domestic coating equipment manufacturers, the size of many different equipment manufacturers, exc
Reasons for bad curing of powder coating filmIn powder spraying, the reason for bad curing of the coating film is twofold, one is the formulation design of powder coating is not reasonable, the coating film performance can not meet the requirements, the second is the performance of the powder coatin
Is it necessary to have my powder cure oven commissioned by a trained professional?Absolutely. As an oven manufacturer, we cannot suggest anything more critical. Even though the oven may have been factory tested, the conditions on-site may differ from the factory setting. The functionality and perfo
In the process of powder spraying of aluminum profiles, a common problem that makes powder spraying technicians feel headache is the protruding particles-particles on the surface of the powder coating coating. The particles seriously affect the decorativeness of the surface coating of the aluminum p
Reasons and precautions of phosphating and rusting in pretreatment of powder spraying equipmentPowder spraying equipment assembly line is generally composed of pre-processing equipment, powder spraying equipment, drying tunnel and chain, and electronic control equipment.The pretreatment electrophore
Causes and solutions of condensation in dust processing equipment 1. Dust processing equipment has air leakage We all know that the internal temperature of the dust processing equipment is very high when it is working, and if the machine leaks, it will enter part of the outside air inside it. When t