Family Owned Enterprise

Focus On Professional Powder Coating System Solution
You are here: Home » Service » News » Company News » Control flow of the air unit for electrostatic spraying equipment

Recent News

Control flow of the air unit for electrostatic spraying equipment

Views: 20     Author: Site Editor     Publish Time: 2021-02-01      Origin: Site


The spraying process places very high demands on the environment. In addition to a certain temperature and humidity, clean air flowing at a certain speed is also required. This flowing air is the necessary material basis for achieving the ambient temperature and humidity and interacts with each other in a way that is indispensable. 


Wind speed control is achieved by the following components: wind speed sensor, PLC, frequency converter, fan. The wind speed sensor converts the current wind speed into an electrical signal and sends it to the PLC, which, after a certain control algorithm, controls the working frequency of the frequency converter and adjusts the speed of the fan to change the air volume and thus the wind speed.  The air speed is then set in the parameter table of the PLC control system. 

Product Inquiry

Contact Us

Hebei Hanna Technology Co.,Ltd
 Economic and Technology Development Zone, Shijiazhuang city, Hebei Province, China
 +86-186 3213 8668  (Mark Lee)
Hebei Hanna Technology Co., ltD.



 Hebei Hanna Technology CO., LTD
 Dongsheng Plaza, No. 508 Zhongshan East Road, Shijiazhuang City, Hebei Province, China.
 +86-186 3213 8668  (Mark Lee)
 +86-311-85290396 (Reply within 24 hours)                                                  Powder:
 © 2020 Hebei Hanna Technology CO., LTD.  all rights reserved.    sitemap.xml  冀ICP备18001507号-1