Spraying machine brings a lot of convenience to our work. It is very important to know how to use this equipment correctly. Let us find out what problems should be noticed! 1. According to the size of the work object, the gun heads with different calibers can be used. Generally speaking, the spra
(1) high quality cold rolled sheet with thickness less than 1mmNo pinholes will appear after painting. If there is a crack, because there is air in the crack, coating solidification may cause coating interruption and discontinuity, that is, large pores;A porosity is caused by rust or dirt on the sur
The reason for the pinhole in the spray is related to the following points:1. The workpiece has a small amount of water or oil on the surface before spraying. When the temperature is solidified, the oil or water evaporates and vaporizes, leaving pinholes on the workpiece.2. If the pinholes are one p
This is the standard to check the quality of the powder coating system. This standard applies to a single coating equipment, such as powder coating pre-treatment equipment, electrostatic spray powder painting equipment,powder coating booth, powder coating drying room, etc., also applies to all types of coating production lines, such as powder coating lines,electrostatic powder coating line,electrostatic spraying paint line.