Do you know the spray line? Do you know about powder coating? Come on, you have to get a little knowledge when using the powder sprayer under the science spray line equipment.Powder spraying is a dry spraying method. It is applied to some metal workpieces by spraying or fluidized bed. sales@powderspraymachine.com

Spraying machine brings a lot of convenience to our work. It is very important to know how to use this equipment correctly. Let us find out what problems should be noticed! 1. According to the size of the work object, the gun heads with different calibers can be used. Generally speaking, the spra

(1) high quality cold rolled sheet with thickness less than 1mmNo pinholes will appear after painting. If there is a crack, because there is air in the crack, coating solidification may cause coating interruption and discontinuity, that is, large pores;A porosity is caused by rust or dirt on the sur

The reason for the pinhole in the spray is related to the following points:1. The workpiece has a small amount of water or oil on the surface before spraying. When the temperature is solidified, the oil or water evaporates and vaporizes, leaving pinholes on the workpiece.2. If the pinholes are one p

HeBei Hanna Powder Coating equipment since the year 1990 ,have the proffessional team on the