Causes of blistering and loss of light in powder coating system spraying and how to deal with it. Causes 1. The surface of the object to be coated is wet or there is acid, salt, salt, and other substances. 2. Water mixed with paint and thinners. 3. The surface of the object to be coa
Considering from the powder coating, if the matching between the resin and the curing agent is unreasonable in the formulation design, for example, the reactivity selection of the resin or the selection of the type and amount of the curing agent is unreasonable; the mass percentage or the volume con
Powder coating is a new technology and new technology in the field of modern coating industry. It is also one of the new technologies promoted in China. It is widely used in home appliances and other fields. Powder coating is a highly protective and highly decorative coating method. To obtain a sati
The surface shrinkage of the spray equipment during the coating process has both substrate reasons, pretreatment, chrome contamination, powder coating, compressed air and management. It should be targeted at different shrinkage. Holes, find the cause, take different solutions, and establish preventi
First, the voltageThe voltage has a great influence on the electrophoretic coating; the higher the voltage, the thicker the electrophoretic paint film, and the spraying ability can be improved for the parts that are difficult to spray, and the construction time is shortened. However, if the voltage
HANNA METAL TECHNOLOGY WELCOME YOU! Electrostatic Spray Coating Equipment Apply Step:Loading products--Pre-treatment--Electrostatic Spray Powder Coating Booth--Oven Curing--Cooling--Unloading First step: Pre-treatment Pretreatment system is for you to wash the oil and dust on the products, it will help you have a good electrostatic spray coatingperformance.