The Hanna powder coating line manual quick color change solution will reduce production stagnation time and increase productivity. Color change time: 15 minutes Advantages: Economical Disadvantages: Not suitable for multiple color change Hanna patent: Filter recovery unit quick disassemble is convenient for color change Powder recovery rate: 98%

Spray voltage1.1 Within a certain range, the spray voltage increases and the amount of powder adhesion increases, but when the voltage exceeds 90KV, the amount of powder adhesion decreases with the increase of voltage.1.2 When the voltage increases, the initial growth rate of the powder layer increa

We all know that the filter element is an important part of the spray house powder recovery system. Its quality will directly affect the recovery effect of the electrostatic spray line. Therefore, whether the filter element can clean the filter cloth in time and effectively during use. The accumulat

First, the voltageThe voltage has a great influence on the electrophoretic coating; the higher the voltage, the thicker the electrophoretic paint film, and the spraying ability can be improved for the parts that are difficult to spray, and the construction time is shortened. However, if the voltage

Electrostatic spray is a commonly used spray method. The surface of the workpiece sprayed with electrostatic spray is smooth, the coating is thick, and the defects of particles are not easy to occur. Moreover, the adhesion of the surface coating film is good, and the corrosion resistance and weather

Waste powder is a powder that cannot be reused in the field. The powder in the waste powder hopper in the big (small) cyclone separation system has a relatively small particle size and the charging effect is not good, and it is difficult to spray on the workpiece.The waste powder rate is the percent

Main factors affecting the quality during the electrostatic spray coating process and Important parameters affecting the quality of the electrostatic spray coating pre-treatment process , Hanna Metal Technology Specialized in powder coating line, powder coating machine, powder coating equipment, powder coating gun.

HANNA METAL TECHNOLOGY WELCOME YOU! Electrostatic Spray Coating Equipment Apply Step:Loading products--Pre-treatment--Electrostatic Spray Powder Coating Booth--Oven Curing--Cooling--Unloading First step: Pre-treatment Pretreatment system is for you to wash the oil and dust on the products, it will help you have a good electrostatic spray coatingperformance.

The most important part of safety management of the electrostatic is the grounding of all conductive items. The using and cleaning of the Spraying Powder Gun also need to follow the precautions to ensure safe and efficient when in and after production. 1. High voltage electrostatic generator ground