Each product has its own unique structure, and different products have different functions, and the value of their use is also directly affected by the different products. The powder coating systems have played a very good role in our lives since they were developed until now, making our lives more

Causes of blistering and loss of light in powder coating system spraying and how to deal with it. Causes 1. The surface of the object to be coated is wet or there is acid, salt, salt, and other substances. 2. Water mixed with paint and thinners. 3. The surface of the object to be coa

An automated powder coating system is the hardware of coating quality, but even the best and most advanced automated powder coating system is still useless if it is not properly managed. Keeping the automated powder coating system in the good technical condition is one of the necessary conditions to

Hanna automatic conveyor system features:1. Based on customer needs, provide the corresponding optimal design2. Fine workmanship to ensure operational stability3. Highly automated process to increase efficiency

Chromizing, Phosphating,Vitrification, Silane: Chromization Principle: chromate solution and metal reaction, produce chromization layer on the surface of the workpiece.Application: mainly for aluminum, magnesium and its alloyswhen dealing with steel, often matching used with phosphating.Function: in

Pinholes and shrinkage cavities are common defects in the use of powder coatings. Their presence not only affects the appearance quality of the products, but also seriously affects the mechanical properties and protective properties of the products. Most of the corrosion of the materials to be prote

Three important stages for good powder coating process.+86 13363836725

The thermosetting powder coating is applied by a high-voltage, low-current electrostatic spraying process. When spraying, an automatic coating line consisting of a manual spray gun or multiple spray guns can be used. Friction guns that work on the principle of triboelectric charging are not effectiv

The powder coating uses powder coating, and the process uses electrostatic spraying. Under the influence of the accelerating wind, the powder particles are sprayed out of the gun body and carry a positive charge, which is in contact with the negatively charged profile. Electrostatically adsorbed and