Powder Coating Booth is a powder supply unit that consists of a powder drum (with powder for coating) and a sieve. Powder Coating Booth usually refers to a complete system of powder coating systems, consisting of multiple powder coating units or subsystems. The above four parts can form a complete

1. Big cyclone powder coating booth adopts the combination of Chinese and foreign technology, the recovery rate can reach more than 95%. 2. The post-recovery machine adopts water curtain recovery, which is simple and efficient. 1) The powder coating booth is designed with a powder collection flotati

PVC is Insulating and non-conductive material ，The electrostatic powder forms a light and thin layer on the surface of the material, which has a rebound effect on the electrostatic powder afterwards, effectively avoiding powder accumulation. easy to clean, save time and labor; the booth is contained

Spraying equipment is more and more widely used in people’s lives. For the industry that uses electrostatic spraying equipment, the color of the product is different. It is difficult to change another color in a few days or a few hours. At the same time, it is necessary to clean the spray booth and

The Hanna powder coating line manual quick color change solution will reduce production stagnation time and increase productivity. Color change time: 15 minutesAdvantages: EconomicalDisadvantages: Not suitable for multiple color changeHanna patent: Filter recovery unit quick disassemble is convenient for color change

The Maintaince of Fast Automatic Color Change Powder Coating Booth

Powder coating booth in general adopting engineering plastic, it including both PVC and PP. PVC usually applied in common powder coating booth, PP used in high-end quality powder coating booth. The engineering plastic has good insulating property, which is uneasy to accumulate the powder on the boot

sales@powderspraymachine.com The production of powder coating spray booth is the key process in the spraying production process. When the spray equipment is working, the key to the quality of the surface of the spray is the control of various process parameters during the spraying process.

The thermosetting powder coating is applied by a high-voltage, low-current electrostatic spraying process. When spraying, an automatic coating line consisting of a manual spray gun or multiple spray guns can be used. Friction guns that work on the principle of triboelectric charging are not effectiv

Powder coating rate is important for powder coating process. And there are several points need to care in the powder coating booth.