Application areas of uv coating equipmentThe advantages of UV coating equipment are many: the drying time is particularly fast, the curing is instantaneous after UV irradiation, and there are no volatile organic compounds, no toxicity, no harm to the human body, and no pollution of the environment.
Solving Powder Coating Line Utilization Failure With the development of science and technology, manual production is increasingly not to meet the needs of enterprise flow, replaced by industrial automation production, industrial automation production can be better to free productivity, improve produ
In practice, Aluminium profile coatings can develop linear or lattice cracks that resemble dry riverbeds, a phenomenon known as "large cracks". Large cracks" are usually caused by insufficient solvent when the coating film is melted during the baking process. This phenomenon is aggravated by the fol
Electrostatic spraying equipment should not be exposed to rain or humidity and should be kept away from flammable gases and liquids.The user should regularly check cleaning and maintenance and clean the powder supply system once a week to ensure smooth operation. When changing powder, the control po
Causes of blistering and loss of light in powder coating system spraying and how to deal with it. Causes 1. The surface of the object to be coated is wet or there is acid, salt, salt, and other substances. 2. Water mixed with paint and thinners. 3. The surface of the object to be coa
An automated powder coating system is the hardware of coating quality, but even the best and most advanced automated powder coating system is still useless if it is not properly managed. Keeping the automated powder coating system in the good technical condition is one of the necessary conditions to
The airless sprayer is used in painting operations, so it must be taken care of in the process of application. This not only affects the power of the purchased construction, but also affects the quality of the construction. So, how do you prepare for the construction before and after the constructio