Automatic Powder Coating Line Maintenance Precautions I. Daily Maintenance of the Automatic Powder Coating Line a. Removes the spray gun atomizing cap and nozzle and clean with gun wash water. b. Check that the automatic oiling cup is sufficiently lubricated to allow for timely replenishment.

Application areas of uv coating equipmentThe advantages of UV coating equipment are many: the drying time is particularly fast, the curing is instantaneous after UV irradiation, and there are no volatile organic compounds, no toxicity, no harm to the human body, and no pollution of the environment.

Solving Powder Coating Line Utilization Failure With the development of science and technology, manual production is increasingly not to meet the needs of enterprise flow, replaced by industrial automation production, industrial automation production can be better to free productivity, improve produ

When selecting a powder coating oven, the following points should be noted. 　　1, with automatic temperature control of the powder coating oven, the oven temperature should be adjustable within 100-250 ℃, control the temperature error is less than ± 10%. 　　2, with automatic timing control of the powd

The color difference is simply the difference in color. After the high temperature curing of the workpiece of the electrostatic spray equipment, the color of the surface is different, which is called "color difference".

What is Powder Coating ?

Drying curing furnace is mainly a baking curing temperature environment for coating, hot air circulate in the oven heating, high thermal efficiency, furnace temperature equilibrium, to save energy. Heat source can use electricity, coal, oil, gas, choice of biological particles and so on widely.Oven

The curing oven is one of the indispensable equipments in the powder coating production line. The function of the curing furnace determines the quality of the produced workpiece.

Our Automatic Electrostatic Powder Spraying Line includes: 1. Electrostatic Powder Coating Machine 2. Powder Coating Booth, Powder Spray Room, Multi-function Spray Room, Fast Automatic Color Change Powder Spraying Room, Electrostatic Powder Spraying Gun, Reciprocator, PLC Contral System 3. Pretreatment Equipment 4. Powder Recovery Equipment, Large Cyclone Powder Recovery System 5. Curing Oven, Hot Air Furnace, Biological Granule Combustion Machine, Gas Burner, Electric Heating Oven 6. Powder Coating System Transport Components, Automatic Elevating Equipment, Chain Suspension Conveying Equipment

Selection of Heating Mode of Curing Oven (Heating Energy).The curing heating system is an important part of the powder spraying production line.